AC 1315 High Gloss Sealer
AC 1315 High Gloss Concrete Sealer is designed to provide a high gloss shine for your concrete surface. This sealer is a solvent-based acrylic compound. Though AC 1315 can be used indoors, it is recommended for outdoor use only. If you choose to apply this sealer indoors, use in an area well ventilated to the outside. A respirator can also be used and is required in a poorly ventilated area. AC 1315 should not be used in an occupied home or in a basement.
Coverage: At 2-3 thin coats, 200 square feet per gallon
Application: Apply with an HVLP Sprayer, Padco® Smoother or Padco® Coater to apply this product. Apply one thin coat at a time moving in one direction across the floor. Allow to dry. Apply the second thin coat of sealer moving in a perpendicular direction to the first coat (i.e. First coat applied North to South; Second coat applied East to West). Be sure to allow for adequate drying time between each coat of sealer.
***Only spray Sealer using an HVLP Sprayer.
Cure & Seal: No, this sealer is not a Cure & Seal. Your concrete should be completely cured before applying this product.
Drying Time: Each thin coat of sealer should be given at least 24-hours drying time before another coat is applied and 72-hours before allowing foot or heavy traffic.
Environmental/VOC Regulations: Due to environmental regulations, AC 1315 sealer cannot be used in California and much of the Northeastern United States. See map on product page for more information.
