Sample Size Sprayable Satin Finish Concrete Sealer is our most popular solvent-based, outdoor, satin finish concrete sealer. Sprayable, easy-to-apply and fast drying. Acrylic xylene-based cure and seal product designed to provide a satin gloss shine for any exterior or interior concrete surface. Due to the strong odor, Sprayable Satin Finish Concrete Sealer is not recommended for basements, occupied homes or businesses. A respirator must be used in all poorly ventilated areas. Preferred choice for exterior concrete and garage floor applications where slip hazards might be a concern. Sprayable Satin Finish sealer is available in a range of sizes appropriate for any project indoors or out. Sprayable Satin Finish is also available in over 40 colors.
Application: Sample Size Sprayable Satin Finish Concrete Sealer is applied using a foam brush or hand-held roller. For larger projects, the sealer is most commonly applied with a pump-up fence and deck sprayer or a 3/8″ nap roller but HPLV or airless sprayer rated for xylene could also be used. For best results, apply thin coats to increase strength and clarity. Applying an additional coat of sealer to a surface that is tacky, milky or has ridges will not improve the overall appearance of the floor and will only compound existing problems. Depending on weather conditions, drying time is 4-8 hours between coats. Use xylene for tool and sprayer clean-up.
For more information about choosing solvent vs. water-based concrete sealers, visit our blog.
Key Sample Size Sprayable Satin Finish Concrete Sealer Features:
- • 4 and 8 oz. sample sizes for pre-application testing and small projects
• Most popular solvent and outdoor concrete sealer
• Covers approximately 2-3 sq. ft. per sample depending on application technique, concrete porosity, and surface conditions
• Apply samples using a foam brush
• Available in over 40 colors