Liquid Colored Antique Sample Size

Liquid Colored Antique can be used to restore color to previously stained or integrally-colored stamped or smooth surfaces and can be applied directly on top of an existing sealer. On smooth surfaces, the pigment will collect where you spray it most heavily. On textured surfaces, the pigment will flow to the lowest part of the impression, adding natural looking highlights. The liquid vehicle evaporates, leaving the pigment to shadow or accent the surface.

Allow the final coat of antiquing solution to dry for a minimum 5-6 hours depending on weather conditions before sealing. Indoor surfaces should be given 8-9 hours drying time before applying a sealer. All decorative concrete surfaces must be sealed with a quality concrete sealer to maintain their color and general appearance over time. For best results with Liquid Colored Antique, sealers should be either sprayed on or carefully applied with a short-napped roller.

Key Features in Liquid Colored Antique Sample Sizes 

• Perfect for testing color and application technique
• Can be applied to previously sealed concrete or surfaces that cannot be acid stained
• Covers approximately 4 sq. ft. per sample, depending on application technique, concrete porosity, and surface conditions.
• Shake well before use. Apply using a spray bottle, sponge or foam brush
• Over 40 colors to choose from
• Adds depth and dimension to stamped or stenciled concrete
• Creates a multi-toned look on any textured outdoor/indoor surface
• Perfect for cultured stone and stamped, textured, stenciled or excessively porous exterior concrete
• Detailed How-to Instructions included in every purchase.
• Shake well before use. Apply using a pump sprayer, sponge or foam brush

Related Products: