Soy Gel Paint and Sealer  Stripper $30.95 per Quart $78.50 per Gallon $295.50 per 5 Gallon GREEN PRODUCT!

Soy Gel is an industrial strength and consumer friendly paint, urethane, epoxy and acrylic stripper made with 100% American grown soybeans.

The low evaporation rate of Soy Gel and its gel formulation make it possible to remove several layers in one application. Soy Gel will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water based stains). Soy Gel contains no methylene chloride, is not an alkaline-based stripper and cleans up easily with water. Unlike more traditional paint strippers, Soy Gel lets you work without the odor. Indoors or outdoors, you can be guaranteed a safe restoration process with Soy Gel.

Application:

Soy Gel is safe to use on concrete, brick, stone, metal, plaster, wood and many other surfaces. Do not use on plastic, PVC, rubber or dry wall. Soy Gel may be used indoors or outdoors. When used outdoors, protect plant and vegetation with a plastic drop cloth. Soy Gel may be used on vertical as well as horizontal projects.

Apply a thick, even layer of Soy Gel, generally between 1/16 and 1/8 inch to the coating to be removed by using a gauge rake, squeegee rake or airless sprayer (piston pumped with tip of 519 or similar). Don’t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, recover area with the soy gel and recheck again later. If covered with plastic sheeting either indoors or out, Soy Gel should remain wet and working for several hours. If Soy Gel is left to sit, always cover with a light plastic drop cloth to prolong the stripper’s wet time. If the Soy Gel is allowed to harden on the surface, apply more of the product to soften the dry material for removal. Once the coating has released from the surface, remove it with a scraper, industrial wet vacuum or other stripping tool. Reapply the product if needed to completely remove thick layers of material.   After use, clean remaining residue with a solution of water and Simple Green organic degreaser using a scrub brush or mop. All Soy Gel and cleanser residue must be removed and the surface allowed to dry before proceeding with a colorant, such as acid stain or DCI Concrete Dye, or a sealer.

Coverage:

For horizontal applications, Soy Gel will cover up to 200 sq. ft. per gallon and up to 130 sq. ft. for vertical applications. Coverage will vary depending on how thick the paint, polyurethane, varnish, sealer, etc. must be removed. Additional Soy Gel may be needed in certain conditions.

Click here for additional technical information on this product.