Applying acid stain and concrete sealer in the summer months can be challenging especially if you live in a hot temperature climate. Here are a few tips from our own General Manager, Shawna Turner, for outdoor concrete and countertop projects that will help DIYer’s get it right the first time.
Amie Nolen: Welcome to the podcast, Shawna.
Shawna Turner: Thank you.
ST: Concrete temperature and wind conditions often determine success or failure for an acid stain project. Hot, dry conditions can cause acid stain to prematurely dry before properly reacting with the concrete. But how hot is too hot? Concrete shouldn’t be more than 75-80F for best staining results. Dry, windy conditions can wick the moisture from the concrete leaving a “blotchy” appearance behind particularly when using both light and dark colors.
What can be with our outdoor concrete besides wait until the fall?
ST: Well, it’s not quite as bad as all that. The most important step for homeowners applying acid stain either late in the evening or early in the morning when concrete temperatures are at their lowest. As the day heats up, so does the concrete and air begins to pass through the surface. When temperatures are cooling, the concrete contracts and is therefore a better candidate for staining or sealing. Keep in mind that direct sunlight and ambient temperature are not the same. Lay a thermometer on the concrete surface and cover with a towel. If after 4-5 minutes the temperature is greater than 80°F, do not stain.
Another valuable tip is to lightly dampen not flood the concrete before applying acid stain to add moisture and prevent premature drying. Premature drying can retard color development and isn’t helpful if you’re working with multiple colors outdoors.
What about sealing specifically? I know hot temperatures can really cause problems. What should customers be looking out for?
ST: Without question, DO NOT attempt to seal in the heat of the day. Colored concrete in direct sunlight, especially dark browns and black, could be several times hotter than the ambient temperature and just a few minutes of sunlight will raise the surface temperature very quickly. If the concrete is too hot, small air bubbles will often appear either during the application or just after. The air bubbles are formed by air rising through the concrete and becoming trapped in the sealer. The bubbles will eventually collapse leaving unattractive concave spots behind. Not very attractive, especially on outdoor kitchen countertops.
Finding the right time of day to apply concrete sealer during the summer months can be a challenge. Sealers, like acid stain, should be applied when the concrete is at its lowest temperature either early in the morning or late in the evening. East facing concrete should be sealed later in the day and west facing early in the morning.
AN: What time of year do you normally do “maintenance” on your decorative concrete?
ST: Never if I can get away with it! No, I’m kidding. I usually do my resealing in the late spring when you can get a couple of rain free days and if that fails, before winter sets in. Because I live in Oklahoma where the summers are very hot, I seldom attempt to seal my exterior concrete during the summer months. It can be done but most of the time I don’t want to get up that early.
AN: Thanks for the summertime acid staining and sealing advice. I hope everyone will listen in before beginning their projects this summer season. If you have questions, call one of our expert technicians at 877-255-2656 and we’ll help you select the best products and technique for your needs. If you prefer email, send in a free online design consultation and we’ll get back to you within 24-48 hours.
Direct Colors DIY Home Improvement podcasts are produced twice monthly for your enjoyment and show notes can be found at directcolors.com/listen. Feel free to add the podcast to your favorite RSS feed. You can also follow us on Twitter, Facebook, Google+ , YouTube and Instagram. Thanks again for joining us!