• Concrete dye trial sample sizes are available in over 40 colors
• Purchase with or without the 6 oz. aerosol sprayer
• Use with 150 ml of acetone for each color. Purchase acetone separately.
• Perfect for pre-application testing and smaller jobs like stenciling or border work
• Sample packet covers approximately 4 sq. ft. per sample depending on surface conditions.
Concrete Dye Trial Sample Size is perfect for testing, smaller projects and concrete countertops. Acetone Concrete Dye is quick-drying, easy-to-apply acetone-based, translucent topical colorant intended for concrete floor or similar applications. When used properly, this product will provide true, consistent color for indoor and outdoor surfaces. This product is a dye and seal product and is not intended for polished concrete floors. Concrete Dye is an excellent choice as secondary accents on tinted concrete sealer and acid stain finishes, stenciling, design work, and borders.
For best results, seal the surface before applying the dye. If the concrete has been ground or has a rougher texture, a second coat of sealer may be necessary. Three or more dye coats are generally required to achieve most colors. Each additional coat will produce a darker, more intense color. For enhanced color diversity, apply two or more dye colors. Seal the concrete immediately after applying to protect the finish. Acetone must be purchased separately. For best results, apply concrete dye samples using an aerosol sprayer. Each sprayer will cover approximately 50 sq. ft. and is refillable.
If using a hand-held pump-up sprayer, air pressure is essential to a successful concrete dye application. Pump up the sprayer to the highest point possible. The concrete dye should spray as a mist and not in the form of droplets. If the sprayer begins to drip and dye droplets form, stop and pump up the sprayer again. Frequently pumping the sprayer to maintain consistently high pressure will produce the best application results.