Soy Gel Paint and Sealer Stripper
$35.95 – $329.95
Prep for Acid Staining with Low odor, Easy to Use for Indoor/Outdoor Paint or Sealer Removal
• Safely removes paint without sanding or grinding
• Environmentally-friendly, low odor, and easy-to-use
• Quick acting, fast and safe disposal
• Ideal for any concrete surface, especially indoor floors and basements
Industrial strength and environmentally-friendly paint, urethane, polyurethane, epoxy, and acrylic stripper made with 100% American grown soybeans? The low evaporation rate of Soy Gel and its gel formulation make it possible to remove several layers in one application. Soy Gel will not lighten any acid stained, color hardened and integrally colored concrete surfaces (will lighten or remove solvent dyes and water based stains). Unlike more traditional paint strippers, Soy Gel lets you work without the odor so it’s ideal for indoor and basement projects. Soy Gel is safe to use indoors or out on concrete, brick, stone, metal, plaster, wood and many other surfaces. When used outdoors, protect plant and vegetation with a plastic drop cloth. This product will not remove carpet glue, adhesives. mastic or like from concrete. Click here for a carpet glue remover.
Removes Latex paint, Enamel paint, Lead-based paint, 2-part epoxies (solid count must lower than 40%), Urethane, Varnishes, Concrete Surface Sealers. Soy Gel Paint and Sealer Stripper will not take out a penetrating sealer, it will only remove a surface or membrane-forming sealer.
Covers approximately 200 sq. ft. per gallon depending on surface conditions and the material to be removed. A second application may be needed for thicker coatings. Do not use on plastic, PVC, rubber or drywall.
Apply Soy Gel to the surface between 1/16 and 1/8 inch thick. Don’t brush or scrape the surface until the stripper has had time to work. Check the progress of the stripping action by using a scraper to see if the coating is softened down to the surface. If not, recover area with the soy gel and recheck again later. Cover with plastic sheeting either indoors or out to extend the wet processing time by several hours. If the Soy Gel is allowed to harden on the surface, do not attempt to remove. Apply more of the product to soften the dry material for removal. Once the coating has released from the surface, remove with a scraper, industrial wet vacuum or another stripping tool. Reapply the product if needed to completely remove thick layers of material. After use, scrub the remaining residue from the concrete with a concrete degreaser and water solution. Wash until all cleanser residues have been removed. This is a critical step to ensure successful future staining and sealing.
*30-60 minutes will usually remove multiple coats of paint, lacquer, acrylic, epoxy or enamel finishes; if stripping older paint or water based sealer, Soy Gel may need to be left on overnight. Keep the product moist at all times and cover with plastic to minimize evaporation